Absolutely nowhere near the amazing builds that many have already posted, you guys build some killer cars
, but mine might be of interest.
It's not a low budget car, but th list of customisation that I could do on it (over and above what is being done) is still signiicant.
It's a 68 Camaro.
AME front clip. Coilovers all round
Minitubbed with 325x50x17's on rear
245x45x17 on front
I also wanted a 4" ride height and that is what has been achieved. No wedge
To achieve this, custom 4 link rear end, and on the AME front we increased to top of the coilover mounting point by 1.5" to give 2.5" of travel.
I would have loved to channel it and get it even lower, but I have to set a budget that is realistic and I had other mods that were more important to me.
As said maybe not quite what you are thinking, but it is in Australia and is running an AME front clip, not sure if this is what you may have been referring to earlier. Car still 10-12 months off completion.
My major customisations are all internal (massive dash, console and hood lining changes)
