View Single Post
  #27  
Old 01-27-2009, 10:50 PM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 13,487
Thanks: 7,751
Thanked 2,376 Times in 1,112 Posts
Default

Quote:
Originally Posted by JRouche View Post
Re: dead head or bypass. I think bypass is a better system for the street. With a properly set up regulator. Its ALL in the regulator. If the pump is up to the task for the injectors, the tank is properly baffled and sumped, the pick up is at the right location (below main tank, at sump level) and the lines are of sufficient size. It all comes down to the regulator. If its not giving consistent pressures and flow to the injectors you will have problems with consistency for HP and torque and drivability on the street..

A dead head system will over heat the pump in a street car. Its cavitating and pumping within itself. Trying to make its own bleed off, so it pumps back into itself, back into the tank as cavitation.

With a bypass system the regulator is the dead head. It should be coupled with a pump that can supply it with enough pressure to keep it on full regulation. So then it can bleed off the necessary fuel to the injectors and still bleed of the remainder back to the tank. But it needs to be operating at a full pressure (from the pump) so its at full head pressure all the times. So in essence its like a dead head system, locking the pressure, its determined pressure, at all times for the injectors. The advantage is it will still allow fuel flow when its at peak pressure.

A fluid pump needs to have some flow, even at max pressure, its what cools them. No fans. Take a look at a high pressure washer, the better pumps have a bleed. That bleed cools the pump.

A dead head fuel system works fine for a race system. Only short races, some races may last what a hour or two (Thats long). Not like a street car that needs to last years under stopped traffic and not much demand.. Unless you pack a spare pump and tools for every ride

Im thinking a bypass fuel delivery system for a fuel injected car is the best. Not like the days of carburetors and mechanical pumps where a dead head system works fine. Low pressures and remember, they are pulling fuel (mech pumps) not pushing it, big diff. JR

the deadhead system we were speaking of still has a bypass regulator, just not up front at the rails.

Jody
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote