[ironworks]

IRONWORKS SPEED AND KUSTOM did the majority of the work on this car.

We were hired to install a quadra link and minitubs, and do the quarters.

There are many parts Tyson is leaving out, like the fact the Work was not completed when done. When I went to go look at the car before we did the work, I told him to take it to a frame shop and have it straightened because the wheel base on passenger side was off by at least a 1/2". He then took it to a frame shop and had it straightened. Then weeks later he brought the car to me supposedly after it was straightened. We then began work on the car by doing the mini tubs and quarter panels. Well we found out that the car was not even square enough to fit the tubs in according to the tub templates. The tubs and everything was pushed forward on the passenger side alot. We had to align the quarter panels with the wheel base only to find that the door jam on the was about a 1/2" forward of the old door jamb and the rear section that would attach or line up with the trunk lid was about 3/8 of an inch long. So we installed the doors and front sheetmetal to see how things fit and to tray and find one sqaure stiaght edge. Everything lied up with the new door jamb not the old. OR you would have to have a 3/4" door gap to align with the the front sheet metal properly. Then you get to the other side and it was completely the opposite. AT this point I realized I was knee deep in crap and married to quite possibly the worst 69 camaro ever. The Good mark quarters had many other issues like body lines that had to be moved and so on and so forth. I could go on and on.

Yeah we worked on this car over 18 months ago and the Project left unfinished so the owner could take it home and try mock up some things to see what else was no right. Since it left my shop the car has been in 3 other shops that I know of, and has been worked on by other people since it left my shop. So who knows what status it is in now.

Tyson also has left out the fact that total price includes many many other parts installed on this car. AND that I deducted over 10,000 bucks on this project just to be somewhat slightly reasonable on a time and materials job.

He also leaves out fact he filed a complaint with the BAR 6 months ago and the never came to a conclusion. If It is that bad, then what happened?

He also leaves out the fact the Guy he hired to primer the car said the work was up to par for unfinished work.

Tyson also leaves out the fact that I have called him 6 months ago and asked him if there was anything I could do to right the situation on the car. He told me he would rather contine on with his BAR complaint. He then went on to tell people all over town that he was going to get ALL his money back and put me out of business after the car had left my shop 13 months before. And just 2 months before he gave me some camaro parts at my shop for some mock up parts.

Well wouldn't you know that now he thinks he can harass me after I offered to work with Him on anything he was not happy with. And file false claims with the BAR.


Tyson why don't you tell everyone how much you paid for the car at night in someones garage after only inspecting the passenger side in 2007, not 1969. As far as Tyson knew at the time it just had minor rust. Floors were solid, and so on. Tell everyone what you found after you striped the interior. You did not tell me this until we cut the quarter panels off the car. When you get a car that looks to be this straight for that cheap you should have known. Shoot even the roof on the car is bent. This car has been in one hell of an accident and when you buy a roller 1969 camaro in California for 2000 bucks you get what you pay for. You are now just trying to take this out on me after you made the decision to press on. I asked you many time before we got to deep do " ARE YOU SURE" another car would be cheaper, Of course I'm married to it at this point.


I have done alot of work that I have posted on this site, We do quality work. Always have Always will. So if you look at the work on this car and know that we have worked on it, you have to know that there are two sides to every story. Apparently this post was started on friday and he got banned from the site and had created 3 screen names to try and try to get at me since.

So what other shops has this car been in after it left my place?

Rodger Lee