Thread: Camcojb
View Single Post
  #7  
Old 09-27-2005, 07:20 AM
camcojb's Avatar
camcojb camcojb is online now
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 13,273
Thanks: 6,820
Thanked 2,109 Times in 966 Posts
Default

I'm not ignoring you. I am however an idiot! You said dolly but I was thinking rotisserie which is not here. I have a dolly here (Pascual has made three of them}.

From side to side at the front mounting points is 40.5" center to center. From side to side at the rear is 34.5" center to center. From front to rear mounting points is 66.75". The legs coming up at the front are 12.5" tall and at the rear are 6.5" tall. These are as close as I can get measuring, as my car is still on the dolly.

Would not be a bad idea to extend the rear tires further back as they are a bit rear heavy. However we have loaded them on car trailers several times with no issue.



Jody
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank

Last edited by camcojb; 09-27-2005 at 07:37 AM.
Reply With Quote