Quote:
Originally Posted by RaiderLefty
My only problem is that I'm still having issues with the brakes. The pedal occasionally gets soft on the first push and then much harder on subsequent pushes. I thought I still had air in the rear lines somewhere but I've tried both the normal "pump" method as well as gravity bleeding them and am about 99% sure all the air it out yet I can't get rid of the problem.
Any thoughts or ideas are welcome.
|
Check rotor run out. Any rotor movement side to side on a fixed caliper system can push the caliper pistons in, and cause a low pedal on the first application.
Shiny Side Up!
Bill