For shooting single stage colors and the occasional 2 coats (depends on the powder), it works pretty well. It's a low voltage gun that isn't adjustable. It has kind of limited capacity so for small parts you are good but larger parts, you may need more gun. The cut off is about valve cover size. The gun cleans really quickly as well. I have one around the shop and still use it for small quickie types of jobs. Like was said before, PC'ing makes a huge mess (easily cleaned) unless you are doing it in some kind of booth.
PC'ing is just like paint....you need clean air and good prep up front pays dividends in the final product.
HTH,
Rick
__________________
Rick Stevens
Lodestone Billetworks
Billet fluid line clamping solutions
www.lsbilletworks.com
|