Quote:
Originally Posted by Apogee
I think you'll have interference issues with anything more than 4 to 4.25" backspacing and 2" drop spindles. Narrower wheels with less backspacing and smaller tires is one option, bigger wheels would be another option, and so would be running drop springs and OE spindles instead.
You haven't mentioned anything about brakes, but now is the time to consider what you'd like to run since the wheels can make a huge difference in what you can fit later. It usually works out better to select brakes and then wheels...even if you don't purchase the brakes before the wheels, at least it was taken into consideration.
Tobin
KORE3
|
ya for the brakes iam just going to be running the stock sytle single piston for a long time. this isnt my main project just something to drive around. but i really just want the cl205 wheels in the 17in so i will just get the brake that will work if i still have the wheels then. i think if i do a 17*7 with a 4in bs that should do it. i will check to make sure before i buy the wheels.
Thanks for you help Tobin