Quote:
Originally Posted by jy211
There's your answer  |
Now that's gettin' her done.
Gotta set a wheels in mind that would work with that?
If anyone is interested in doing some photochops with a couple themes - I'd find a way to get ya some beers or even a few bucks.
Few other details and some questions I have been stuck on:
Hydroboost - could use some help figuring out what MC size to start with.
Vintage Air Gen IV - already creatively stuffed under the dash.
Dana 44 rear - could use a recommendation to do some strengthening/freshening up.
Smoothed firewall except for column.
ISIS Multiplex Wiring harness will handle the switching
Anyone recommend a soda blaster in South Florida?
Seats - no solid ideas yet.
Guages - no idea - steering wheel will block them anyway.
Exhaust - goal is to get too big pipe stuffed through too small a hole
through the bumper - we shall see.
Rear wheels - widen quarters and massage inner wells as long as I can keep the soft top.
I found the 3G Art Morrison Vette well after diving into this project - and that's probably the closest I have found to what I visualize. Of course I would be thrilled if I can pull of 1/10th of their execution
and would drive that puppy just as it sits below. My hats off to that team.
-R