Moving along..
Well a while back I had a horrible rechome job done Mr G's on a real floor shift gauge bezel I had picked up. I still have the stripped one I picked back up from them but I had an idea. My original column shift bezel is in excellent condition and I happen to have a junk dash out of a 67. After a little measuring I discovered there is one place next the the light switch thats just big enough to cut out a section of the groved material.
I cut it out was a little demmel saw and then got it close with a belt sander. Final fitting was done by hand. The very corners were into the smooth area so I cut groves by hand with a tiny file. Once I get a little touch up paint on it you will never know. 8)
I wanted a little bit of custom touch to the outside of the car and here is what I did. The factory light silver in some of the side mouldings was chipped up and rubbed off so it needed to be redone. I still had some of the dark gray the wheels were done in so that is the color the inserts of the mouldings now. The gray and black with polished stainless looks killer against the red.
