[Musclerodz]

These are dynamic numbers

FVSA 155.2"
caster 6.3*
scrub radius .14
track width 59.5" (I have bumped it out from stock and will be flaring the
the fenders like the Bank's Camaro)

I will be running stock C5 rear wheel specs on C5 knuckles . I will be running adjustable upper arms which will help make track setup easier.

Yes LCA's will be custom made to pick up same pivot as R&P. Standard Cobra or GT rack mount locations are 24" apart. Cobra rack is slightly too wide and I will have to play with arm lengths to get it correct. I was more interested in a GOOD production rack I could easily get if I needed to that would not cost a fortune or have to special order. Most people use the Fox Body GT racks, but after a lot of research on CC.com, I found I could use an '03 Cobra with excellent feedback but would need to install the shorter GT arms.

Marcus has a bunch more stuff on the suspension including the graphs that I have not got yet as what he sent I am still trying to absorb. He did say that the numbers I have are to the point that any change to make something better, made something else worse.

Mike