Quote:
Originally Posted by LateNight72
It really depends on the tire, pressures, etc. For instance, I will be running 30 series tires on the front suspension I am building (the one with a thread a couple down), and 35 series on the back, whenever I get around to designing an IRS.
The tire "squish" is negligible in a 30/5 series that's properly inflated.
|
Even if it's a 1/2 inch, it's not "negligable". Take a look at what it does to your IC calculation in your thread. Seems like if you are doing these layouts for geometry, you want to start with the most accurate information.
So, do the tire manufacturers give you this info or................?