Finshed up setting up the custom E-brake system with the factory pedal. Works perfect. Ended up making a braket to drop down the front cable bracket so it pulls dead straight on the rear cable brakets. I took lots of consideration and where to run the rear cables so they will move as needed but not get in the way of anything moving in the suspension. I used stainless clamps picked up at a local street rod shop to attach them to the frame. I'm pleased with the looks and function.
The next task was to center the rear with the upper control arms and finally check tire and wheel clearance at full suspention travel and at ride height. Well my home made measuring tool worked like a charm. Wheel wells are as full as they can be and I didn't cut a thing. I may need some very slight clearancing with a hammer on one of the inner wheel wells but I will have to drive it to see first. Of course I had to snap a shot of the future ride stance.
