View Single Post
  #2  
Old 04-05-2009, 02:21 PM
383T/A's Avatar
383T/A 383T/A is offline
Junior Member
 
Join Date: Apr 2009
Location: Albertville, MN
Posts: 19
Thanks: 0
Thanked 0 Times in 0 Posts
Default

now onto what wasnt seen in pics:
entire bottom of car was stripped and undercoated with bedliner, all -6 aeroquip plumbing for trans cooler, oil cooler, steering, (new quick ratio gear as well).
HID bi-xenon lights, all new weatherstrip, everysuspension component was stripped, powdercoated and wear items were replaced with poly, and upgraded hardware
complete energy suspension mounts, bushings etc...
full single 3" ss Exhaust exiting out of a Flowmaster
or via my electric cut-out.
Rear end was droped out and new axles, and 4.11 gear set were installed, tubes were welded, and housing was powdercoated black
addco sway front and rear were added.
full SS flaming river style steering shaft with SS universal joints (no-more rag joint)

paint will be a 2 tone, very similar to the car in this link, except Im using HOK Orion Silver and Jet Black with a lime green stripe similar to the orange on here.
http://www.hotrod.com/featuredvehicl...aro/index.html
paint will be completed in the next few weeks, and then final re-assembly.
__________________
-Jeremy

Last edited by 383T/A; 04-05-2009 at 03:00 PM.
Reply With Quote