Well todays update should really be called a back date because I made major negative progress.
I made my last brake lines that go from the master to the prop. valve on the frame. Also made a small bracket that bolts to the pedal bracket stud on the firewall to keep the lines from getting in to the steering colum or clutch linkage. All is well so far. Things went down hill from there.
This the first time I have ever used stainless line. I had heard its a little harder to to get to seal but I had no idea how bad it was going to be. I started to bleed the brake lines and saw some fluid dripping on the floor from the prop. valve. I then start looking close at all the connections and more than 1/2 of them are leaking to one extent or another.
I manage to to get most of them sealed up by tightening and loosening several times but some the the lines on the prop valve I could not get to without removing the starter which it the big PITA with the lakewood scatter shield. To remove the starter I had to disconnect the clutch linkage too.
I got the last of the lines sealed up and a nice hard pedal so it was time to put it all back together. When I got to the clutch linkage I noticed the fork was kind of flopping around like the spring had slid off the ball. No big deal slid it back right? NOT!! I tried for 5 min feeling for it with the fork to slid it on but it never would catch. I finally resorted to a light and a mirror so I could see up in there and could believe my eyes. There was no spring clip. Brand new fork and the spring had broken off at the rivet
Now the motor has to come out again which is not a huge deal in itself but I have to wait for another fork to be shipped to me.
At this point I needed to just get away so I took the wife and daughter to the park for a couple hours. We got back and I wanted to get a little more done before it got dark. I was bolting down one of the front seats and I over did it on one of the studs. POP!!! Its broke now the carpet has to come out on the drivers side so I can weld a new stud. Its just wasn't my day.