Thread: 4rs-fed
View Single Post
  #1  
Old 04-28-2009, 01:44 AM
Greg from Aus's Avatar
Greg from Aus Greg from Aus is offline
Senior Member
 
Join Date: Jan 2008
Location: Western Australia
Posts: 808
Thanks: 87
Thanked 20 Times in 3 Posts
Default 4rs-fed

4rs-fed

Hy Guys I thought I would introduce my project. I live in Perth Western Australia, I purchased the car in August 2007 from a guy in Newport Beach CA.
The family and I had a holiday in the States September 2008 and managed to catch up with Frank,Lisa and Micheal from Prodogy and placed my order for a lot of parts to turn this into a nice Pro Tourer.

As you can see the car looked OK before we started, but as I started to strip it down I found lots of things that I was not happy about. They have put partial floors in and done a terrible job. My painter isn’t very happy about the rear Quarters either, so there won’t be much original metal by the time I am finished. I am replacing the full floor, Boot floor, firewall , both rear quarters and since I am shaving the drip rails and putting a 6 point cage in it I might as well replace the roof as well, as it will make the cage install easier.
I am hoping to get the car ready for SummerNats 2011 Australia's lagest car show. The car will be pro touring but will see regular ¼ Mile action.


At the Nostalgia Drags

Attachment 17287



In the USA

Attachment 17288

Attachment 17289

Attachment 17290
Reply With Quote