Do not cut that 1/4 off or start working until you have the door opening pulled and squared. That rocker panel is in which means there is some floor damage in that area. Trying to hang a door and 1/4 without aligning the inner structure will be a disaster in the end. There is more than just surface damages there. You will be surprised how much works out when pulled into shape.
Bring to a shop to have pulled which depending on your area will run you about $500.
If you do not straighten while pulling you will never get it right. If you have never changed a 1/4 or are doing a 80% panel you might as well fix it. The lines are usually the easy part the harder part is the curved flat surface.
|