I looked around and I have found some guns like the DeVilbiss Finish line that say they will work on a 3hp compressor and has 10psi at the tip with 23psi input. From what I gather on my compressor, if it's 6.4 at 90, then 8.6 at 40, it must be close to 10scfm at 25 or so. My limitation is mostly likely the 30 gallon tank, but I'm not planning on painting more than a fender at a time.
I have used a dessicant in my line for my tools, but I will definitly upgrade to a quality filter set-up.
__________________
1969 Firebird, Black w/Parchment Arizen interior, 383 Pontiac Stroker (350/428 crank), TKO600, Moser 12 bolt, 18" TTII's, Hotchkis, GW, DSE, Speed Tech, Vintage A/C, etc.
|