View Single Post
  #37  
Old 10-10-2005, 08:52 PM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 13,453
Thanks: 7,578
Thanked 2,318 Times in 1,087 Posts
Default

Quote:
Originally Posted by JimM
Close is good... I even shopped the website and found that, as long as the $$$ is in line with the 69 tail lights, I could do it!!

You mentioned before that a triplle light, with a small backup light lens between 2 larger red lens is on the list. Just what I need for my 68 non rs currently sporting 67 RS tailights and zero backup lights. I also read that your billet bezels can use the stock lampholders... which only have 2 sockets... how's this gonna work?
The 67/8 tails will definitely be more than the 69's. There's more parts involved and machining time is at least twice as long. We'll keep them as low as possible, but will not be in line with the 69's.

All our lenses use the stock lampholders. The triple light is a possible option for the 69's which have three sockets.

Jody
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote