Quote:
Originally Posted by 69MyWay
Thanks for this link - I'm waiting for some info from these guys.
THEY ARE MADE IN THE USA! It is getting SO hard to find anything made here anymore. I do what I can to buy domestic when I can - as long as the price is something I can swing. Waiting for prices and additional info.
I have no problem notching my ceiling drywall for a taller post to slip in place -but would prefer a lift made for the lower ceiling. If I read right they are basically 12' tall on the up posts.
|
No, the columns aren't 12 foot. I did a bit of digging through their info and found that the A-7 model has column height listed at 7'11-1/2" (2.43 m). Any additional height above that is just the hydraulic crossover line, and there are a few things you can do with that to give you clearance. You can cut the line down to fit along your low ceiling, or you can cut a 1" x 1" trough in your concrete floor between the beams and route it there.
Here's the link to the page I found the height info at:
http://www.mohawklifts.com/consumer/specs/a7spec.php