Quote:
|
Originally Posted by race-rodz
are you gonna be running a chin spoiler of some kind? if not i think the bottom of the core support really needs some blackout treatment.
my personal mustang project is on hold (again) due to a certain shop truck getting all the attention. but everytime i look at the updated posts of this car i get all warm and fuzzy inside...almost wanna go drag it back out and start workin on it  i hate having too many projects  |
Hi RR,
The photo is a bit decieving. It was taken at a very low angle. You really have to bend over quite a bit before you see much of the core suppot at all (if any). Here is a photo looking straight into the grill. This is what you would see if you were squatting down about 20 feet in front of the car.
Once the valance is painted Yellow, you will not even notice the core support, even if you were low enough to see it. Although, God save you if this is what you see when the car is doing about 160. :-)
Also, we have about 3.5" of clearance below the K-member.
And, hey, don't worry about your project car. It will be ready and waiting for you when you have the time to work on it. Project cars, unlike wives, are very forgiving that way. :-)