thanks guy's for your help I have sb 400 scat crank H beam rods edelbrock etec 200 cylinder heads all brand new in boxes don't have the pistons or machine work don yet. I could building this engine with about 8.8 compression 7 psi boost. I have most of the necessary things to build a very cool sb but the magnacharger would cost about $6600 satin or $7700 polished. I think the engine would produce about 550- 575 hp.with very good torque #. I like the idea of this set up very much. I still need to get belt drive system for what ever engine I put in the car.so I'm try my best to justify the expense of this cool engine.[magnacharger don't offer ecm and sensors for this set up but edelbrock do's for $3000.for every thing].so build this engine or go with an LSX motor I have posted LSX vs sb 400 to get as much feedback as possible.if I could find a supercharger completes with everything I need for $6-7000 I would go with it. but that is still high compared with an motor from frank say at about $4-5000........................Gen 1 Gen 1E M112 Fuel Injected Kit (includes M112 Supercharger, intake& top plate, 42lb injectors, fuel rails, 78mm intake, intercooler assembly, crank pulley, idler assembly, assembly, distributor hold down, alt bracket, 6 rib belt, gaskets, spacers and hardware)
05-33-12-005-PO Gen 1E, 112 Fuel Injected, Classic Drive, Long Water Pump (8.85) Polished $7,700.00
05-33-12-005 Gen 1E, 112 Fuel Injected, Classic Drive, Long Water Pump (8.85) Satin $6,600.00
Last edited by anthony 69; 05-22-2009 at 10:20 PM.
|