Scott, I am running 4 3/4 BS on the front (17x8) and 5.5 BS on a 17x9.5 rear wheel. Datsbad is referring to the front BS 4 7/8. I think there are some minor differences in the 67-8 and the 69 wheel housings. What brakes are you running on the front? Do you have factory disks or do you have a C4/Baer set up? I know there are differences on the "track width" (think it is called) with the drum and disk spindles hubs. The disk style put the wheel about 3/8 inch further out than the drum hub. I would base my wheel offset on ones that are similiar to the one that you are going to use. Datsbad and Scott can give you better info on the 69 stuff better than I can. Hope this helps you.
__________________
Chris
1968 Camaro SS
LS3/T56
Full of DSE and Holley parts
Last edited by 130fe; 10-16-2005 at 03:17 PM.
|