from the computer since friday.
Anyway, I am running a 21st Centruy sub frame so a C5 Or C6 wheel bolts right up without any spacers. I know DSE designed their sub so you could have a little bit of a lip on the wheel. Call Mark at DSE and he can give you that info. Not sure on the AME sub, but Jack Ass is using one of those and running the ZR1 wheel, which is the same offset as the Z06 wheel, but 1/2 inch wider. May want to ask Charlie or Stielow if they used a spacer up front. On the rear, I am sure they built the rear to the correct width. I am running regular C6 stuff on the rear but had mine built to length. I am running a very small spacer on each side as I did not want it too wide and also be able to adjust the spacers to get the wheels perfectly located in the wheel well.
What I like about using a corvette offset is plenty of great wheels for sale on
www.corvetteforum.com