I talked with Carter Hickman a few times about some ideas on this project and he was excited to work with me on some different body mods and looks that we were going for on the car.
Here is a brief run down on the list of mods. We will be running Lexan windows like a prostock drag car. Flush mounted and bolt in with tiny flush allens. We will also be working with Anvil Auto on getting every Carbon fiber piece possible. Flat Hood, cowl panel no vents, hood vents, trunk lid and spoiler. I'm have heard rumors of a front valance and possibly doors. Marquez Design will be handling all the trick billet parts. Ring Brothers is setting us up with a set of some trick hood hinges and some hood pins.
The Wheels are a one off design the Eric turner whipped up in a bout 7 minutes flat. We will be working with EVOD wheels to do our own design.
The BFG R1 Slicks started arriving today and they are almost as tall as me piled up. THAT'S TALL. The slicks measure 285/30/18 and 335/30/18.
The BFG KDW 2's should start arriving soon. Those will me 295/35/18 and 335/30/18.
