Quote:
Originally Posted by Apogee
The rear center hose is a standard part from just about any hose supplier. As for the ones to run from the tee fitting to the calipers, those will certainly be custom. Other than price and weight, there's really no reason not to go that route if you like. Do keep in mind that you'll want an AN adapter fitting at either the tee fitting or the caliper banjo fitting so that you can tighten the hose without having to wind it up...orientation of the banjo is fixed at the caliper, so you'll need to have some give somewhere.
Tobin
KORE3
|
Thanks Tobin,
I am running Wilwoods so I will make sure to run the spinning nut on the ends that hook onto the caliper.