View Single Post
  #1  
Old 07-05-2009, 04:26 PM
camcojb's Avatar
camcojb camcojb is online now
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 13,271
Thanks: 6,814
Thanked 2,108 Times in 965 Posts
Default got my Chevelle out for a spin

just finished charging the a/c and decided to go out and do some tuning, since I'd swapped the cam this winter. Put about 25 miles on it, cruising through town. Doesn't overheat, runs great.

Had not got into boost, just loading the car easy playing with the tune. Right before I got home I decided to push it into boost to take a peek at the a/f. Going about 55 mph in 4th gear, and as I put the throttle down it downshifted, blew the tires off, and went 90 degrees sideways...........

son of a ..................................... well, I gathered it in without issue, but was very surprised. All in all a successful first drive, and I think this car is going to be a blast, but I'll be pulling some boost out of it for the street.................

Jody
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote