Quote:
Originally Posted by 70rs
Will a clutch from a truck fit? I don't remember what trans you are using. I seem to recall those trucks (8.1 one tons) were offered with a manual trans. You should be able to get a new clutch from any local GM parts dept. Unless it won't fit inside the bellhousing you are using. What set up are going to use for the trans and bellhousing?
|
You are correct, the trucks came with a manual and had either a 5 speed or ZF6 - I have the flywheel (new) in hand now and will be talking to Centerforce more next week.
Once I have a clutch, I should be able to hook all the other stock style stuff to the Richmond Six that I have for the car.
The thing is, most ZF trans I have seen have the reverse diaphram which makes me think that (with a modified clutch disc for the ROD 6) won't work with the 69 Vette linkage (push vs. pull).
We'll see.