The 3 cell system should be more than enough. It comes with default programming as follows. You can see all the additional outputs available.
POWERCELL™ unit 1- Switch Input 1: OPEN
POWERCELL™ unit 1- Switch Input 2: OPEN
POWERCELL™ unit 1- Switch Input 3: Ignition*
POWERCELL™ unit 1- Switch Input 4: Starter*
POWERCELL™ unit 1- Switch Input 5: Headlights
POWERCELL™ unit 1- Switch Input 6: Parking Lights Instrument Lights etc.
POWERCELL™ unit 1- Switch Input 7: High Beams
POWERCELL™ unit 1- Switch Input 8: OPEN
POWERCELL™ unit 1- Switch Input 9: Horn
POWERCELL™ unit 1- Switch Input 10: Fan Override-or-Spare
*Not allowed when security is ON
POWERCELL™ unit 2- Switch Input 11: Left Turn Signal
POWERCELL™ unit 2- Switch Input 12: Right Turn Signal
POWERCELL™ unit 2- Switch Input 13: 4-Way Flashers
POWERCELL™ unit 2- Switch Input 14: Brake Lights
POWERCELL™ unit 2- Switch Input 15: OPEN
POWERCELL™ unit 2- Switch Input 16: OPEN
POWERCELL™ unit 2- Switch Input 17: OPEN
POWERCELL™ unit 2- Switch Input 18: OPEN
POWERCELL™ unit 2- Switch Input 19: OPEN
POWERCELL™ unit 2- Switch Input 20: OPEN
POWERCELL™ unit 2- Switch Input 21: OPEN
I encourage you to hop on the Pro-Touring.com forum and check out our thread. We also started a new thread to discuss installation. Some of those guys have already installed the system.
|