Quote:
Originally Posted by PonchoJohn
Looking good.
How close was the upper spring mount vs. the lower?
|
In location, it's freaking spot on. Unfortunately the springs from the 2005 subframe are too short, by 4-5 inches. I have to retrieve the original springs to see if they are more the right size, but I haven't gone to get them yet. I'm planning, hoping, praying that I can figure out a rear coilover setup that will work. Still trying to figure that one out, though. I could re-configure the spring perches to support coilovers, or use the original shock mount on the subframe and fabricate something up. I'm going to work on the rear crossmember design for the diff mount, and see if it could be used to locate the uppers for the shocks/coilovers.