Hello:
I've been looking for other suppliers for 1st Generation Camaro Parts. (Specifically 1969)
Here is a letter I sent out and the response I received.
==============================================
From: Jason (AT) UnbalancedEngineering.com
Subject: Re: Question about F-Body parts for the First Generation Camaro
Date: July 29, 2009 8:46:04 AM CDT
To: tyoneal (AT) flash.net
Hey Ty,
We don't currently offer anything for 1st gens, but we may be interested. Is there anyone you know with a car in So Cal with a car in the early building stages?
If not, have you tried Global West? Thanks!
Jason S.
Ty O'Neal wrote:
Hello:
I was researching through Corner Carvers and you Name and Company was mentioned as a possible place to get some trick 1st generation Parts for Camaro's.
I know there is a number of people interested in, "Pro-Touring/Road Racing", the 67-69 Camaro's. Needless to say the higher tech parts, especially in having the ability to run a larger front wheels/tire combinations (315 mm Front), are really lacking.
Do you have anything regarding this, or have anything that might be offered in the near future?
If not on both these questions, who would you recommend me contacting for this?
Thanks,
Best Regards,
Ty O'Neal
Frisco, Texas
--
Jason Swindle, P.E.
www.UnbalancedEngineering.com
=============================================
This might be a viable contact for us, but I live in Texas. So Cal is to far for me, however if there is anyone here that can meet with these people, it could prove to be a good thing for our hobby.
Please pass the above information around to other sites that could possible have someone who could see these people.
Thanks,
Ty