if you want a "show car" i would use 3 coats of clear. let it fully cure. bust it open and block it with 600 grit on a hard foam block untill all the texture is gone. grey scotch brite any areas that you didnt 600. then reclear the car with 3-4 more coats of clear. once its cured, you should be able to start with 1000-1500 from there and move up and buff.. i use a really heavy clear like ppgs concepts 2021. 4 coats is more than enough. if you use a thinner clear i still think 4 coats would be enough but ive never tried the thinner clears so im not sure..
__________________
'69 Camaro- Daily Driver
'70 Chevelle- Project
|