Quote:
Originally Posted by Josh69
Excellent! My next build has to be a truck, you guys are killin' me here! Thank god we have guys like you and Rodger to figure these out for the boneheads like me to bolt together!!  |
Thanks I hope Rodger brings his truck so I don't feel lonely
On the to the update
Parts and Design
Finally broke down and bought a new processor for my computer and now I can work without the darn thing dying when Solidworks loads up calculating changes.
Steering arm parts came in from the laser yesterday. I just got them nailed together, I’ll try to get some photos on the knuckle next time. You can see the 3D model up in my previous post.
BIG thanks to the crew over at Pfadt. Not only did they send me there new aluminum lower mounts they also built special models for me to add into the computer. They even build special radius pieces into the shock so when I check the suspension travel I make sure the Patten Pending Delrin / Aluminum upper mount doesn’t bind up. Huge thanks for that. Next to the shocks are the Sway bar arms from Pfadt. The Rear is going to be the stock C5 width (The C5 rear is wider than the C6) so we can use Pfadt’s stock rear sway bar and the front will be custom cut for our narrowed front end.
-Russell