Quote:
Originally Posted by redfire69
X2!
If your doing outer rocker and full floor, you might as well do inner rockers as they collect water and debris and rot from the inside out. I ended up cutting the floor away from the inner rocker and replacing the inner and outer rockers as an assembly. After that, I cut away the remaining floor to make way for the one-piece replacement. Of course, adequate bracing needs to be in place. Fun stuff!
|
That would probably be the smart thing to do.
New full floor, full trunk, full quarters, both inner and outer rockers, new trunk lid and not to mention the other area's of the car (door skins, etc.) and I will end up with all brand new metal. I just hope in the long run everything lines up straight with decent gaps.
Thanks Ron.