[69MyWay]

Now for the good stuff. We have to have a constant 55 PSI or so of pressure to run the engine just like and LS1/2/3/6/7. I picked up a killer TRE 343 in-tank pump which is a 255 gal per hour. Mouting a wire through bushing through the top of the tank, and welding a bracket to the stock pickup - I was able to get the electric pump in the tank and plumbed in place. We added a vent line too that will go to an emission can so we can run a sealed gas cap and not have fumes in the garage.

We will have a 99-09 Corvette fuel filter/regulator mounted by the tank and then a stock line all the way to the engine.