Quote:
Originally Posted by hifi875
so if you have a floor that has been clear coated, what it the best route to go if you want to epoxy the floor. i helped my father in law do his, we used muratic acid and i about died, it ruined my shoes and was hard to breathe. i don't really want to do it again that way.
|
From what i've read, your best bet might be to rent a shot blaster or floor surfacer to remove the old paint. Local rental places here were no help but you might have better luck. As mentioned, Garage Journal site has lots of info on this subject. I'd check there for other opinions. I just know that if you don't get the existing surface coating off there will be problems
.
John