Thread: Rattle Can Self Etching
View Single Post
  #2  
Old 08-19-2009, 08:51 AM
68protouring454's Avatar
68protouring454 68protouring454 is offline
Senior Member
  
Join Date: Jul 2004
Posts: 1,593
Thanks: 0
Thanked 1 Time in 1 Post
Default
never etch prime under filler, or apply filler over etch primer. if metal is clean properly, putting filler on it is no issue. If your concerned use a epoxy primer on the bare metal areas, then sand with 120-180 then do filler work
jake
__________________
Jake's Rod Shop
Reply With Quote