Good afternoon gentlemen!
I thought I would clear up this issue before it gets any worse. I would agree that the part in question is our Adjustable Leaf Spring Pads (p/n: 040201) as that is the only thing that could be considered a floater. Detroit Speed recommends that they be welded to the rear axle housing. They are sold as a bolt-in item only for mock-up purposes. This allows for the rear axle to be centered in the car and the pinion angle set. Once this is done, we recommend that the axle be removed from the vehicle and the pads be permanently welded to the axle housing.
I have personally verified our instructions and they state the exact same thing I previously mentioned. If anyone has any questions, please don't hesitate to call.
Mark Chichester
Sales Manager
Detroit Speed, Inc.
|