Doing the full one piece floor is not hard but does take alot of time. If you have basic skills and time than I say do it yourself. Lots of spot welds to cut so make sure you get a good drill and a good spot weld drill bit DO NOT use the Blair bits. If you do make sure they are strait when you drill or they will brake. The ones I use are from Dent Fix for standard drill set up. As for pricing not bad $50.00 an hour is not out of line. Some shops charge more some shops charge less, in the end it's the quality of the job that counts.
__________________
Rick
[SIGPIC]https://neversaynever0304.files.wordpress.com/2014/07/you-didnt-see-anything.gif[/SIGPIC]
|