Quote:
Originally Posted by ItDoRun
Before I started my current build, I installed a set of LS1 brakes on the front of my car. I didn't use a proportioning valve, but instead used a Wilwood residual valve between the front and rear of the car. After fabricating all new lines for the car, I learned that they make a 1/8-27 NPT and a 1/8-28 NPT thread.
What size is the connection that's leaking?
|
Interesting. But I dont think there is a NPT in 1/8-28. The standard is a 27tpi. Not saying there isnt a 28tpi in some pipe threads, just that its not NPT. JR