View Single Post
  #49  
Old 09-03-2009, 05:18 AM
ccracin's Avatar
ccracin ccracin is offline
Senior Member
 
Join Date: Sep 2006
Location: Rostraver, PA
Posts: 2,077
Thanks: 0
Thanked 4 Times in 4 Posts
Default

Quote:
Originally Posted by GregWeld View Post
Chad ---

Wegner has got to have some pretty good techs there... I'm thinking there are at least two mathematical issues here:

1: The flow rate of the injectors... you need "X" amount of fuel to support "X" amount of HP...

2: Air flow of the throttle body... again - "X" amount of cubic inches has to flow through this "restrictor" - no?

So I'm wondering -- since HP is only a mathematical equation based on TQ -- if the TQ number was good -- and the RPMS are through the roof - then maybe the actual math might be supported to make a bit more than their saying in their Ads?? They (they being FAST) most likely don't want to be responsible for guys going lean and wasting their brand new pride and joy...
I agree Greg. From talking with Casey Wegner, they definitely know what they are doing. I also know of them from my circle track days. I think there is more coming in this line of products from FAST. When I talked to their tech line they said that the next 90 days would show more. My problem is I have been offered a deal that is time sensative and I am not sure wether to pull the trigger or not.
__________________
Chad
Instagram - @cctek
https://https://www.facebook.com/CCTek

68 Chevy Pickup Project
Build Thread: https://lateral-g.net/forums/showthread.php4?t=7505

THANKS TO: A&M Machine and Fabrication, CCTek (http://www.candctek.com), Hermance Design(www.hermancedesign.com), Paradise Road Rod & Custom, Harry Opfer Welding, Wegner Automotive Research, Clayton Machine Works
Reply With Quote