View Single Post
  #3  
Old 09-05-2009, 02:48 PM
clay69camaro's Avatar
clay69camaro clay69camaro is offline
Senior Member
 
Join Date: Mar 2009
Location: So-Cal
Posts: 242
Thanks: 0
Thanked 3 Times in 1 Post
Default the brakes

I painted all this stuff with caliper rattle can when I got it all, and some of the parts got brake fluid on them either during install or when I removed them from the car so a re-coat might be necessary.
Name:  connor and maria (halloween) 010.jpg
Views: 108
Size:  91.3 KB
what you'll be getting

Name:  connor and maria (halloween) 012.jpg
Views: 83
Size:  57.4 KB
Both discs have lots of life just need a little brushing to get surface rust off

Name:  connor and maria (halloween) 013.jpg
Views: 86
Size:  79.9 KB
spindles look brand new just a little dirty

Name:  connor and maria (halloween) 014.jpg
Views: 78
Size:  75.4 KB
Same with the calipers

Name:  connor and maria (halloween) 015.jpg
Views: 83
Size:  71.4 KB
This caliper is missing the spacer/collar on the right side. The only other thing missing from this disc kit is going to be the dust shields

Name:  connor and maria (halloween) 016.jpg
Views: 69
Size:  87.8 KB
Brake pads come with kit

Name:  connor and maria (halloween) 017.jpg
Views: 90
Size:  49.2 KB
They are barely used, This whole kit honestly had very low miles.

Name:  connor and maria (halloween) 018.jpg
Views: 91
Size:  86.1 KB
Also have both hard lines for the front from the booster/prop valve

Last edited by clay69camaro; 09-05-2009 at 02:52 PM.
Reply With Quote