Quote:
Originally Posted by DJW32
Can someone help me out? The lines on the passenger side are for the diff cooler, right? I assume that the line on the left will be the fuel line? Also, I assume that this will be a dead head fuel setup...like the corvette?
|
Lines on the pass side are 1/2" for diff cooler. I made them 1/2" due to the fact I'm going to the front of the car. The line on the left is a 3/8" fuel line. I put it on the driver’s side because the LS7 fuel feed is on that side of the engine. My first time making hardlines from scratch. It was fun if you have the right benders. I purchased Ridged benders off Ebay cheap. The 1/2" lines take some effort to bend.
Mark