Quote:
Originally Posted by Stielow
Lines on the pass side are 1/2" for diff cooler. I made them 1/2" due to the fact I'm going to the front of the car. The line on the left is a 3/8" fuel line. I put it on the driver’s side because the LS7 fuel feed is on that side of the engine. My first time making hardlines from scratch. It was fun if you have the right benders. I purchased Ridged benders off Ebay cheap. The 1/2" lines take some effort to bend.
Mark
|
I love the Ridgid stuff, they work great. Stainless can be tough to bend, gets pretty stiff in the 1/2" size. I learned on aluminum............
Jody