There are 2 different frame pads one set for SBC/BBC and one set for ls motors. Since you purchased the sub off the internet we have no idea what frame pads you have. if you had called us we could have figured it out. Also you will have to remove the rack from the bracket (leave the bracket on the subframe) to get the pan over it when trying to install the motor trans at the same time with the sub on the car. next time i would install the motor trans in the sub then the sub in the car once everything is painted that way no scratches. make sure to square up the sub to the body as well.
Feel free to call us we have a toll free number. we are the ones who know the answers. i am sure most on here do not.
The LS pads have a "D" and a "P" punched in them, if you can not see the marks then measure your frame pads on the top side of the pad from the sub to the center line of the mounting tube, if they are the same then you need the LS pads if they are different then the short one goes on the passanger side.
dont worry everything fits
|