they had prototypes at SEMA. Had Hotchkis laser cut into the flat plates on the arms. The lowers have tapered spring seats like stock, no indexable lower polly seat insert like GW or Speed Tech lowers. The lower BJ socket was hitting the stock rotor, so they made the same mistake Speed Tech, DSE has made by leaving too much meat on the bottom outer edge. But again these were show versions.
The uppers have caster adjustment inserts like DSE and ATS, the shafts look a lot like DSE, they were shiny like stainless but I forgot to ask if they were stainless or plated, they look more like stainless. They do use Delrin bushings, not polly. The welds didn't look all that great, kinda blobbed on, probably mig welded, but they were early versions. I didn't care for the color.
I didn't hear a price, I think I picked up a flyer on them but it's in the "big pile" of stuff I picked up at SEMA and I haven't gone through it yet.
David
Last edited by David Pozzi; 11-10-2005 at 12:44 AM.
|