Thread: Comp SBC billet hydraulic roller camshaft, Procharger bypass valve
View Single Post
  #1  
Old 10-12-2009, 08:08 AM
Blown353 Blown353 is offline
Senior Member
  
Join Date: Nov 2004
Location: Central Valley, CA
Posts: 925
Thanks: 0
Thanked 88 Times in 34 Posts
Default Comp SBC billet hydraulic roller camshaft, Procharger bypass valve
Still have a few leftover parts I don't need anymore.

I'm near Sacramento, CA.

PM with questions/offers/"I'll take it."

Comp hydraulic roller cam for SBC, custom grind, intended for use with turbos. Brand new in box, uninstalled. 3317S/3317S Xtreme Energy series lobes, 242/242 @ .050, .540/.540 lift with 1.5 rockers, 115.5 LSA. Ground on a -9 billet core to take higher spring pressures but with a pressed on iron distributor gear for long life on the street (no need for a bronze gear.)
$175


Procharger Pro-Flow bypass valve. $50

__________________
1969 Chevelle
Old setup: Procharged/intercooled/EFI 353 SBC, TKO, ATS/SPC/Global West suspension, C6 brakes & hydroboost.
In progress: LS2, 3.0 Whipple, T56 Magnum, torque arm & watts link, Wilwood Aero6/4 brakes, Mk60 ABS, Vaporworx, floater 9" rear, etc.
Last edited by Blown353; 10-12-2009 at 12:07 PM.
Reply With Quote