Sure it's possible but be prepaired to make a bunch of custom pieces and spend lots of time. I put a 95 Firebird dash and console into an 87 Pontiac Fiero. Hanging the dash was the easy part. Making it look like it belonged there was the tricky part.
Pay attention to the transition from the back of the dash to the base of the windshield and the ends of the dash at the A-pillars. These are critical transition areas. Using aftermarket mechanical guts will simplify the electrical/mechanical/environmental gauges and controls but you still have to find room for everything.
Good Luck.
Last edited by Mrfixit; 11-17-2009 at 11:37 AM.
Reason: added a "p"
|