[rat_rod_russell]

Thanks Kendall and Steve for the kind words.

Originally Posted by Thomo5150

Thanks Russell I was going to set my front castor at 6.5. Not sure how much difference there is between the Corvette C5 and C6 settings. Is your rack location close to factory spec's to stop any bump steer.

Cheers Tim

C5 and C6 are the same geometrically. I built a custom steering arm that allowed me to lower the rack, use the narrower inside pivots of the C4 corvette rack and pinion and gives me a bump steer adjustment and I'm only seeing .05 degrees of ackerman misalignment all the way though 30 degrees of steering pivot.

-R^3