Since I have hijacked this thread...might as well keep rolling.
Hey Greg...I'm stumped. I re-bench bled the m/c. Getting plenty of flow to the front - all is perfect there.
On the rear (which is also on the rear of the m/c) I am able to get all the air out and it seems to flow well.
When I hook it to the car, I can't get any flow to work down the line. All these lines were new and dry.
I opened it up at the distribution block - and when pressing the pedal can get it to squirt out there, but not much.
I have opened the lines and can't get it to gravity bleed at all.
I tried my siphon technique. It is making good suction, but it won't pull anything to the rear.
I'm stumped.
|