What's going on at the switch? Is your white and black hooked to the switch? If so, that's your problem. Is it hot to the switch or hot to the light?
for a 20A circuit, you should use 12/2. for a 15A you can use 14/3.
However, in this case, this is not your problem of the circuit blowing.
__________________
Steve
'68 Camaro - 355", TKO600, SpeedTech Arms, ATS-AFX Spindles, Hotchkis Springs, Forgeline Wheels, C5 Brakes (Kore3), Holley Terminator EFI
Check it out Here
|